ESP32 Development Board WiFi+Bluetooth Dual Core Microprocessor Ultra-Low Power Consumption
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
Features:
– High performance-price ratio
– Small volume, easily embedded to other products
– Strong function with support LWIP protocol, Freertos
– Supporting three modes: AP, STA, and AP+STA
– Supporting Lua program, easily to develop
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11 b/g/n HT40 Wi-Fi transceiver, baseband, stack and LwIP
– Integrated dual mode Bluetooth (classic and BLE)
– 16 MB flash, memory-mapped to the CPU code space
– 2.3V to 3.6V operating voltage
– (-40°C to +125°C) operating temperature
– On-board PCB antenna / IPEX connector for external antenna
Specifications:
– Ultra-low noise analog amplifier
– Hall sensor
– 10x capacitive touch interfaces
– 32 kHz crystal oscillator
– 3 x UARTs, including hardware flow control
– 3 x SPI
– 2 x I2S
– 18 x ADC input channels
– 2 x DAC
– 2 x I2C
– PWM/timer input/output available on every GPIO pin
– OpenOCD debug interface with 32 kB TRAX buffer
– SDIO master/slave 50 MHz
– Supports external SPI flash up to 16 MB
– SD-card interface support
– WEP, WPA/WPA2 PSK/Enterprise
– Hardware-accelerated encryption: AES/SHA2/Elliptical Curve Cryptography/RSA-4096
– Supports sniffer, Station, SoftAP and Wi-Fi direct mode
– Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b
– Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
– Minimum receiver sensitivity of -97 dBm
– 135 Mbps UDP sustained throughput
– 5 μA power consumption in Deep-sleep
Package Includes:
1 x ESP32 Development Board
ابو نور الحبوبي (verified owner) –
بورد خرافي بسرعة المعالج وصغر الحجم واحتوائه على البلوتوث والواي فاي مما يجعل المشروع صغير وعدم وجود كثره في الاسلاك لربط الواي فاي والبلوتوث اضافة الى وزنه الخفيف… باختصار اني اشوفه بديل مناسب جدا لاغلب بوردات الاردوينو.
ابو نور الحبوبي –
Aland Abdulqadir (verified owner) –
great product, first had problem with choosing the right board in the Arduino IDE but then realized it’s working with the board (ESP32-WROOM-DA Module)
Aland Abdulqadir –