PIC116F84A-04/P 8-Bit Microchip Microcontroller

This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash/EEPROM-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into an 18-pin package.

Features
– Only 35 single word instructions to learn
– All instructions single cycle except for program branches which are two-cycle
– Operating speed: DC – 20 MHz clock input
– Operating speed: DC – 200 ns instruction cycle
– 1024 words of program memory
– 68 bytes of data RAM
– 64 bytes of data EEPROM
– 14-bit wide instruction words
– 8-bit wide data bytes
– 15 special function hardware registers
– Eight-level deep hardware stack
– Direct, indirect and relative addressing modes
– Four interrupt sources:
>External RB0/INT pin
>TMR0 timer overflow
>PORTB<7:4> interrupt on change
>Data EEPROM write complete

Peripheral
– 13 I/O pins with individual direction control
– High current sink/source for direct LED drive
>25 mA sink max. per pin
>25 mA source max. per pin
– TMR0: 8-bit timer/counter with 8-bit programmable prescaler

Special Features:
– 1000 erase/write cycles Enhanced Flash program memory
– 1,000,000 typical erase/write cycles EEPROM data memory
– EEPROM Data Retention > 40 years
– In-Circuit Serial Programming (ICSP™) – via two pins
– Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
– Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
– Code-protection
– Power saving SLEEP mode
– Selectable oscillator options

Package Includes:
1 x PIC116F84A-04/P 8-Bit Microchip Microcontroller