PIC18F4620-I/P 8-Bit Microchip Microcontroller

The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer. Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP (Extreme Low-Power) Technology for where power consumption is a key consideration.
The PIC18F4620-I/P is an enhanced Flash Microcontroller with 10-bit A/D and nanoWatt technology. This offers ten different oscillator options, allowing users a wide range of choices in developing application hardware. This device offers a total of seven operating modes for more efficient power management. These modes provide a variety of options for selective power conservation in applications where resources may be limited. As Harvard architecture device, the data and program memories use separate busses; this allows for concurrent access of the two memory spaces. The data EEPROM, for practical purposes, can be regarded as a peripheral device, since it is addressed and accessed through a set of control registers.

Features:
– C compiler optimized RISC architecture
– 40 MHz Max. CPU Speed
– 75 Instructions – 83 with Extended Instruction Set Enabled
– 31 Level Hardware Stack
-Internal Oscillator – Selectable frequencies from 8 MHz to 31 kHz
– 36 I/O Pins – PIC18F4525/4620 Models
– nanoWatt Technology
– Power-On Reset (POR)
– Power-Up Timer (PWRT)
– Oscillator Start-Up Timer (OST)
– Brown-Out Reset (BOR)
– Extended Watchdog Timer (WDT)
-High/Low-Voltage Detection (HLVD) Module
– In-Circuit Serial Programming (ICSP)
– In-Circuit Debug (ICD)
– Internal oscillator support-31kHz to 8MHz with 4xPLL
– Fail-safe clock monitor, allows safe shutdown if clock fails
– Watchdog timer with separate RC oscillator
– An integrated LCD driver module, capable of driving 48 segments and 4 commons for LCD display
– 10-bit ADC, 12 channels and 100K samples per second
– Programmable brown-out-reset module
– Master synchronous serial port supports SPI™ and I²C™ master and slave mode
– EUSART module including LIN bus support
– Run, idle and sleep modes
– Idle mode currents down to 5.8µA typical
– Sleep mode currents down to 0.1µA typical

Peripherals
– 10-bit Analogue to Digital Converter (ADC)
– Capture, Compare, PWM Modules – x 1
– One Enhanced Capture, Compare, PWM Module – Models Only
– Two Comparators
– One 8-bit Timer
– Three 16-bit Timers
– Master Synchronous Serial Port (MSSP) Module with SPI and I²C
– Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART)

Package Includes:
1 x PIC18F4620-I/P 8-Bit Microchip Microcontroller