1-Layer PZT 5J Piezoelectric Bending Transducer
A single layer product recommended for energy harvesting and sensing applications. It also exhibits good performance as a resonant actuator. It is not recommended for applications requiring high force output. This product does not have mounting and alignment holes like the other products.
A piezoelectric transducer (also known as a piezoelectric sensor) is a device that uses the piezoelectric effect to measure changes in bending by converting this energy into an electrical charge
Note: The device is sold as a used product and is not subject to UrukTech’s terms and conditions of the warranty of, and it works 100% with a condition of operating inspection before purchase.
General Specifications
Parameters | Specifications |
Length (mm.) | 55.4 |
Width (mm.) | 23.4 |
Thickness (mm.) | 0.46 |
Temperature Range | -60° C to 120° C |
Mass (grams) | 2.8 |
Capacitance (nF) | 100 |
Rated Drive Voltage (+/-V) off of Resonance | 120 |
Free Deflect (+/-mm) | 0.80 |
Blocked Force (N) | 0.20 |
Spring const (N/mm) | 0.25 |
Max Amplitude (mm) | 2.0 |
Resonant Freq (Hz) | 130 |
Max Drive Volts @ Resonance (V) | 10.0 |
Harvester / Generator Specifications
Parameter | No tip mass (unloaded) |
EH Resonant Freq (Hz) | 130 |
Open Circuit Output (+/- Volts/G) | 6 |
Resistor Load (Ohm) | 15700 |
Power @ Rated G (mW) | 0.7 |
G rating (+/- G’s) | 8 |
Layer Specifications:
Layer Material | Thickness mils / mm |
Polyester | 2.0 / 0.05 |
Copper | 1.4 / 0.03 |
PZT 5J | 6.0 / 0.15 |
Stainless Steel 304 | 6.0 / 0.15 |
Polyimide | 1.0 / 0.03 |
Package Includes:
1 x 1-Layer PZT 5J Piezoelectric Bending Transducer
There are no reviews yet.